For more information, see “Maintenance procedures” on page 14.
Lexmark T430
The Lexmark T430 prints on paper office labels designed for laser printers. Limit label printing to occasional use. We
do not recommend using vinyl or polyester labels.
The Lexmark T430 supports stocks from 60–163 g/m
2
(16‑43 lb). The multipurpose feeder can feed up to 30 sheets of
dual‑web or integrated labels and 10 sheets of card stock.
The following tables list the maximum weights supported by Tray 1 and the multipurpose feeder.
Overview of card stock support
Paper source Index Bristol Tag Cover
Tray 1 — — —
Multipurpose Feeder*
60–163 g/m
2
(16–43 lb)
—
* Card stock can only be fed from the multipurpose feeder and must always exit to the rear output bin.
Overview of label support
Label type Standard tray Multipurpose feeder Optional trays
Paper X
X
Integrated X
X
Dual web X
X
‑ indicates support
X ‑ indicates no support
Note: Do not place over 100 label sheets in the standard tray or over 30 label sheets in the multipurpose feeder.
Warning—Potential Damage: Feeding labels from print media sources that are not supported may damage your printer.
Printer specifications 91
To Next Page
Loading...
Need help?
General
