The Lexmark C920 supports stocks up to 216 g/m
2
.
The following table lists the maximum weights supported by the standard tray and the multipurpose feeder.
Overview of card stock and label support
Paper source
Card stock Labels
Index Bristol Paper Vinyl
Standard tray —
180 g/m
2
—
Multipurpose feeder
216 g/m
2
180 g/m
2
300 g/m
2
Media specifications
Labels Width: 210–216 mm (8.3–8.5 in.)
Length: 279–297 mm (11–11.7 in.)
Weight:
180 g/m
2
Thickness: 0.13–0.20 mm (0.005–0.008 in.)
Smoothness: 100–400 Sheffield*
* 150–250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Card stock Weight:
Up to 216 g/m
2
Card stock and label guidelines
When printing on labels:
• Use only label sheets that have no gaps between the labels.
Acceptable labels
Unacceptable labels
• Set the Paper Type to Labels in the Paper Menu.
• Do not print a large number of labels continuously.
• Do not use labels that have coating or sizing applied to make the labels liquid‑resistant.
• Do not use labels that have exposed adhesive on the label sheets.
• We recommend using Avery paper labels.
When printing on card stock:
• We recommend using Springhill Index Plus 90 lb card stock.
• For the best print quality, always set the Paper Type to Card Stock in the Paper Menu.
Printer specifications 60
To Next Page
Loading...
Need help?
General
