Lexmark P 450 - USB Flash Drive Operations; Inserting and Copying Photos

Inserting a USB flash drive
1 Insert the USB flash drive into the PictBridge port on the front of the printer.
Notes:
• An adapter may be necessary if your USB flash drive does not fit directly
into the port.
• The printer reads only one photo storage device at a time.
2 Wait for the light on the printer to come on. The light blinks to indicate the flash
drive is being read or is transmitting data.
Copying photos to the USB flash drive
1 Insert a USB flash drive.
2 Insert a memory card or CD.
3 Press
or until Save / Copy appears.
Note: If you edit photos before copying to the USB flash drive, the changes are
saved with the photo.
4 Press .
5 Press or until Copy to CD or USB appears.
Press .
29