Lexmark S400 Series User Manual

Scenario 4: Digital telephone service through a cable provider
Setup 1: Printer is connected directly to a cable modem
Follow this setup if you normally connect your telephone to a cable modem.
Tips for this setup:
•
Connect the printer to the port labeled Phone Line 1 or Phone Port on the cable modem. The port labeled Phone
Line 2 or Fax Port is not always active. You may need to pay extra to your cable provider if you want to activate
the second phone port.
• To make sure that the phone port on the cable modem is active, plug an analog telephone into the phone port, and
then listen for a dial tone. If you hear a dial tone, then the port is active.
• If you need two phone ports for your devices but do not want to pay extra, then do not plug the printer into the
second phone port. You can use a phone splitter. Plug the phone splitter into the Phone Line 1 or Phone Port , and
then plug the printer and telephone into the splitter.
Note: Make sure you use a phone splitter, not a line splitter. To make sure that you are using the correct splitter,
plug an analog telephone into the splitter and then listen for a dial tone.
Faxing
70

Lexmark S400 Series Specifications

General

Brand	Lexmark
Model	S400 Series
Category	Printer
Language	English