Lexmark T640 - Installing Drivers for Network Printing; Network Setup and IP Configuration

PCL
2-4
Lexmark T640, T642, T644
The following table lists page sizes and print area dimensions for all paper and
envelope sizes the Lexmark T640, T642, and T644 printer supports. For more
information about the printable areas and logical pages for PCL emulation, see
“Printable Areas” on page 2-3.
Table 2-1: Lexmark T640, T642, T644 Paper and Envelope Dimensions
Selection
Paper/Envelope
Dimensions
Dimensions by Area (pels)
1
Page Size
Parameters
2
Name mm inches A B C D E F G H I
Paper
13, 613 A5 148 x 210 5.83 x 8.27 3496 4960 3196 4720 142 118 0 100 100
12, 45, 612 JIS B5 Paper 182 x 257 7.2 x 10.1 4300 6070 4000 5830 150 120 0 100 100
26, 626 A4 (198 mm)
3
210 x 297 8.3 x 11.7 4960 7014 4676 6778 142 118 0 80 80
26, 626 A4 (203 mm)
3
210 x 297 8.3 x 11.7 4960 7014 4800 6778 80 118 0 80 80
1, 601 Executive 184 x 267 7.25 x 10.5 4350 6300 4050 6060 150 120 0 100 100
2, 602 Letter 216 x 279 8.5 x 11 5100 6600 4800 6360 150 120 0 100 100
3, 603 Legal 216 x 356 8.5 x 14 5100 8400 4800 8160 150 120 0 100 100
4 or 10 Folio 216 x 330 8.5 x 13 5100 7800 4800 7560 150 120 0 100 100
15 Statement 139.7 x 215.9 5.5 x 8.5 3300 5100 3000 4860 150 120 0 100 100
101 Universal 216 x 356 8.5 x 14 150 120 0 100 100
6 or 11 11 x 17
(Ledger)
431.8 x 279.4 17 x 11 6600 1020
0
6300 9960 150 120 0 100 100
1
Pel dimensions are for 600 dpi.
2
Page Size Parameters are explained in Table 2-12 on page 2-36.
3
The width of the logical page for A4 paper can be changed from the printer operator panel or your software
application.
4
Paper ID 99 will be supported for backward compatibility with other Lexmark printers. Paper ID 99 has the
same logical paper size as ID 100 (compatible with HP LaserJet 5Si/5SiMx) but is 8 pels wider than the
Lexmark 4039.