Lexmark T640 - Page 329

PCL Support
A-5
ESC
*p#X Horizontal Cursor Position (in PCL Units) 2-40 ✓
ESC
*p#Y Vertical Cursor Position (in PCL Units) 2-41 ✓
ESC
*r#A Start Raster Graphics 2-49 ✓
ESC
*r#F Raster Graphics Presentation Mode 2-49 ✓
ESC
*r#S Raster Width (Source) 2-49 ✓
ESC
*r#T Raster Height (Source) 2-49 ✓
ESC
*r#U Simple Color 2-52 ✓
ESC
*rB End Raster Graphics (Version B) 2-50 ✓
ESC
*rC End Raster Graphics (Version C) 2-50 ✓
ESC
*s#I Inquire Status Readback Entity 2-54 ✓
ESC
*s1M Free Space 2-54 ✓
ESC
*s#T Set Status Readback Location Type 2-54 ✓
ESC
*s#U Set Status Readback Location Unit 2-54 ✓
ESC
*s#X Echo 2-54 ✓
ESC
*t#H Raster Width Destination 2-50 ✓
ESC
*t#I Gamma Correction 2-53 ✓
ESC
*t#J Render Algorithm 2-53 ✓
ESC
*t#R Raster Resolution 2-49 ✓
ESC
*t#V Raster Height Destination 2-51 ✓
ESC
*g#W Set Raster Configuration 2-51 ✘
ESC
*v#A Color Component One 2-53 ✓
ESC
*v#B Color Component Two 2-53 ✓
ESC
*v#C Color Component Three 2-53 ✓
ESC
*v#I Assign Color Index 2-53 ✓
ESC
*v#N Source Transparency Mode 2-46 ✓
ESC
*v#O Pattern Transparency Mode 2-46 ✓
ESC
*v#S Foreground Color 2-53 ✓
ESC
*v#T Select Current Pattern 2-46 ✓
ESC
*v#W[data] Configure Image Data 2-53 ✓
Table A-1: PCL Emulation Commands (Continued)
✓ Supported
✘ Not Supported
Command
Page numbers reference command descriptions
Printer
Model
Function Page
T640, T642, T644