Lexmark T654dn - Main Drive Motor Assembly Removal

Repair Information 4-33
4062-XXX
Go Back
Previous
Next
7. Remove the fuser cooling fan connection (C).
Main drive motor assembly removal
1. Remove the system card assembly. Go to “System card assembly removal” on page 4-75.
2. Remove the fuser drive release linkage. Go to “Fuser drive release linkage removal” on page 4-22.
3. Close the operator panel door assembly.
4. Remove the four screws (A) securing the main drive motor assembly to the machine.
5. Gently remove the main drive motor assembly.
B
C