289 staple error
1 Open Door G.
2 Hold the lever on the staple cartridge holder, and move the
holder to the right.
3 Firmly pull the colored tab to remove the staple cartridge.
4 Use the metal tab to lift the staple guard, and then pull out the
sheet of staples.
Discard the entire sheet.
5 Look through the clear covering on the bottom of the cartridge
holder to make sure no staples are jammed at the entrance.
6 Press down on the staple guard until it snaps securely into
place.
7 Push the cartridge holder firmly into the stapler until the holder
clicks into place.
8 Close Door G.
Priming Stapler appears. Priming ensures the stapler is
functioning properly.
8
To Next Page
Loading...
