Setup questions?
Checking first things first
If your All-In-One has a problem, first make sure:
• The power cord is plugged into your All-In-One and into a properly grounded electrical
outlet.
• Your telephone cord is securely attached to the line jack on your All-In-One and to the wall
jack.
• Your telephone has a dial tone.
• The cartridge access doors are both completely closed.
• Ready appears on the display.
• The sticker and transparent tape covering the bottom of the cartridges are removed.
When I inserted the installation software CD, nothing happened.
1 Close all open programs.
2 Restart your computer.
3 Make sure you click Cancel on any screens similar to the one in step 15 on the setup
sheet.
4 Eject, and then reinsert the installation software CD.
5 From your desktop, double-click My Computer.
6 Double-click your CD-ROM drive icon. If necessary, double-click setup.exe.
7 Continue with step 17 on the setup sheet.
Refer to the Quick Reference for other setup and safety information.
P/N 13H0080 EC 3H0024
© Copyright 2002 Lexmark International, Inc. All rights reserved.
Safety information
• CAUTION: Do not make any cabling connections
during a lightning storm.
• Connect the power cord to properly grounded
electrical outlet that is near the product and easily
accessible.
To Previous Page
Loading...
