What to do if the light is not lit on Lexmark X2470?
If the light on your Lexmark All in One Printer isn't lit: 1. Disconnect the power cord from the wall outlet and the printer. 2. Plug the cord fully into the printer's power supply. 3. Plug the cord into a working electrical outlet. 4. Press the power button.
How to remove paper jam in Lexmark All in One Printer?
To remove a paper jam in your Lexmark All in One Printer: * Try to automatically eject the paper by pressing and holding the 'Stop' button. * Remove any paper from the paper exit tray. * If automatic ejection doesn't work, turn off the printer, firmly grasp the paper, and gently pull it out. Then, turn the printer back on.
How to fix poor copy quality on Lexmark X2470?
To address poor copy quality on your Lexmark All in One Printer: * Check the ink level and replace the print cartridge if necessary. * Clean the scanner glass with a clean, lint-free cloth dampened with water if it's dirty. * If copying from a newspaper, magazine, or glossy paper, refer to the section on 'Scanning clear images from'. * Ensure the original document is of satisfactory quality; use a clearer version if possible. * Place the document facedown on the scanner glass.
Why does my Lexmark All in One Printer misfeed paper or specialty media?
If your Lexmark All in One Printer is misfeeding paper or specialty media, try these solutions: * Load a smaller amount of paper into the printer. * Load paper with the print side facing you. * Remove each page as it exits the printer and allow it to dry completely before stacking. * Use only new, unwrinkled paper. * Adjust the paper guides against the left edge of the paper or media (when using media less than 8.5 inches wide), ensuring it doesn't buckle.
Why is my Lexmark All in One Printer not printing?
If your Lexmark All in One Printer is not printing, try the following: * Ensure the power button is lit. If not, refer to the section on 'Power button is not lit'. * Remove and reload the paper. * Check the ink levels and replace the cartridge if needed. * Remove the print cartridge, ensure any stickers or tape are removed, and then reinsert it. * Confirm the printer is set as the default and is not paused. To do this in Windows XP Pro, go to Start ? Settings ? Printers and Faxes. In Windows XP Home, go to Start ? Control Panel ? Printers and Faxes. In Windows 2000, go to Start ? Settings ? Printers. In Windows 98/Me, go to Start ? Settings ? Printers. Then, double-click your printer's name, click 'Printer,' ensure 'Pause Printing' is unchecked, and 'Set As Default' is checked....
How to increase print speed on Lexmark All in One Printer?
To improve the print speed of your Lexmark All in One Printer, you can: * Close any applications that are not currently in use. * Reduce the number and size of graphics and images in your document. * Consider adding more RAM to your computer. * Remove unused fonts from your system. * Select a lower print quality in the printer settings. Access this through File ? Print in your software application, then click Properties, Preferences, Options, or Setup, and find the Quality/Speed settings.
How to fix Lexmark X2470 if the power button is not lit?
If the power button on your Lexmark All in One Printer is not lit, attempt the following: * Disconnect the power supply cord from both the wall outlet and the printer. * Ensure the power cord is fully inserted into the power supply port on the printer. * Plug the cord into a different electrical outlet that is known to be working with other devices. * Press the power button.
How to improve text and graphic quality on Lexmark All in One Printer?
To improve the text and graphic quality of your Lexmark All in One Printer, consider these suggestions: * Check the ink level and replace the print cartridge if necessary. * When printing documents with graphics, photos, photo paper, heavy weight matte or glossy paper, transparencies, labels, envelopes or iron-on transfers, remove each sheet as it exits the printer and allow it to dry to prevent smudging. * Try a different brand of paper, or use Lexmark Premium Photo Paper for photos and high-quality images. * Ensure you are using new, unwrinkled paper.
What to do if the scanner unit of Lexmark X2470 does not close?
If the scanner unit on your Lexmark All in One Printer does not close: * Lift the scanner unit. * Remove any obstruction that is preventing the scanner unit from closing. * Lower the scanner unit.
What to do if Lexmark X2470 copier does not respond?
If the copier function on your Lexmark All in One Printer is not responding: * If the power button is not lit, refer to the section on 'Power button is not lit'. * Uninstall and then reinstall the printer software. * If the software still does not install correctly, visit www.lexmark.com to check for the latest software. Select your country or region (except in the United States), click the links for drivers and downloads, select your printer family and model, select your operating system, and then select the file you want to download and follow the directions on the computer screen.
Instructions for hardware and software setup.
Comprehensive guide for printer operation, maintenance, and troubleshooting.
Contents of the CD and how to access software help.
Software for printer status, ink levels, and troubleshooting.
Verifying all included items are present in the printer packaging.
Identification and explanation of key printer hardware parts.
Explanation of buttons and their operations on the printer's control panel.
Overview of available software tools and their basic functions.
Using Imaging Studio for photo and document tasks.
Steps to launch the All-In-One Center application.
Using the Scanning & Copying tab features.
Tasks for managing and working with saved images.
Accessing printer maintenance and troubleshooting tools.
Controlling and customizing print settings for various jobs.
Editing photos and graphics using the Photo Editor software.
Creating printer-friendly versions of Web pages.
Instructions for loading paper into the printer.
Specific guidance for loading different paper types.
How to place original documents on the scanner glass.
Setting the correct paper type for print jobs.
Procedures for printing standard documents and web content.
Steps for printing photos from a computer or camera.
Steps for making copies and customizing settings.
Procedures for scanning documents and saving images.
Instructions for sending and receiving faxes.
Procedures for removing and installing print cartridges.
Tips and procedures to enhance print output quality.
Aligning and cleaning print cartridges for optimal results.
Resolving issues with printer setup and software installation.
Diagnosing and fixing issues related to printing documents.
Addressing problems with copying and scanning functions.
Troubleshooting fax errors and paper jams.
Understanding error indicators and their corresponding solutions.
FCC, Industry Canada, and EC compliance statements.
Lexmark's limited warranty and product power consumption details.
General| Maximum print size | 210 x 297 mm |
|---|---|
| Borderless printing media sizes | 2L, A4, A5, A6, B5, Hagaki Card, L, Legal, Letter |
| Maximum ISO A-series paper size | A4 |
| Print technology | Inkjet |
| Maximum resolution | 4800 x 1200 DPI |
| Print speed (black, normal quality, A4/US Letter) | 17 ppm |
| Copy speed (black, normal quality, A4) | 1.5 cpm |
| Custom media sizes | 216mm x 432mm |
| Dimensions (WxDxH) | 152.5 x 375 x 286 mm |
| All-in-one functions | Scan |
| Standard media sizes | 10 Envelope (105 x 241mm) 7 3/4 Envelope (98 x 191mm) 9 Envelope (98 x 225mm) A4 (210 x 297mm) A5 (148 x 210mm) B5 Envelope (176 x 250mm) C5 Envelope (162 x 229mm) DL Envelope (110 x 220mm) 6 3/4 Envelope (83 x 165mm) A2 Baronial (111 x 146mm) A6 Card (105 x 148mm) B5 (182 x 257mm) C6 Envelope (114 x 162mm) Hagaki Card (100 x 148mm) Index Card (3\ |
| Media types supported | Card Stock, Coated Paper, Envelopes, Labels, Plain Paper, Transparencies, Banner (A4/Letter), Hagaki Card, Index Card (3\ |
| Color all-in-one functions | copy, print, scan |
| Compatible operating systems | Windows 2000 Windows 98 SE Windows Me Windows XP Windows XP Professional x64 |
| Maximum scan area | 216 x 297 mm |
| Maximum scan resolution | 19200 x 19200 DPI |
| Optical scanning resolution | 600 x 1200 DPI |
| USB port | Yes |
| Standard interfaces | USB 2.0 |
| Maximum input capacity | 100 sheets |
| Digital sender | No |
| Maximum duty cycle | 1000 pages per month |
| Sound pressure level (printing) | 50 dB |
| Certification | Energy Star, CSA, c-UL-us, ICES Class B, Executive Order 132221, CE Class B, CB IEC 60950 IEC 60825-1, GS (TÜV), SEMKO, C-tick mark Class B, V85, CCC Class B, BSMI Class B, METI(PSE), VCCI Class B, FCC Class B, UL 60950 3rd Edition |
| Market positioning | Home & office |
Weight and Dimensions| Weight | 4900 g |
|---|
To Next Page
