11
English
Scanning
The following steps show you how to scan and save images.
1 Open the top cover of the All-In-One.
2 Place the item you want to scan facedown on the glass. Make sure the
upper left corner of the front of the item aligns with the arrow
3 Close the top cover.
4 Open the Lexmark All-In-One Center (see page 5).
The All-In-One Main Page appears.
5 Click Preview Now located in the upper right corner of the All-In-One Main
Page.
An image of the scanned item appears in the preview section.
6 Click and drag to select a specific area of the preview image to scan.
7 Click See More Scan Settings to review and change the scan settings.
8 Select your scan settings.
From the “Send scanned image to” drop-down menu, select a program to
send the scanned image to, or click the Creative Tasks section to display a
list of projects.
9 If you are sending the scanned image to a software program, click Scan
Now to complete the scan. If you are using the Creative Tasks section,
follow the instructions on the computer screen.
For a list of the Creative Tasks available from the All-In-One Main Page, see
page 6.
Copy now settings
Adjust the settings for
the scanned item.
Preview section
See a preview of the image, and select an area to be scanned.
Preview Now button
Click to see a preview
of the image.
Scan Now button
Click to scan the item
on the scanner bed.
Creative Tasks
Choose what you
want to do with the
scanned item.
To Next Page
Loading...
Need help?
General
