Chemical Emissions
Printer emissions testing is performed in accordance with the “Test method
for the determination of emissions from hardcopy devices with respect to
awarding the environmental label for office devices with printing function
according to RAL-UZ 122, “ BAM April 2006.
Emitted Substance Product
Measurement
Maximum
according to
Guideline
Ozone (mg/h) BQL* 1.5
Styrene (mg/h) 0.1 1.0
Benzene (mg/h) BQL* <0.05
Dust (mg/h) BQL* 4.0
TVOC (mg/h) 1.3 10
*BQL – Below Quantifiable Limits
*Note: The print test is performed using genuine Lexmark supplies. Emissions may
vary if using non-Lexmark supplies.
Product Restricted Materials
The reduction of materials harmful to persons or the environment is a
significant part of Lexmark's commitment to continuously improving the
environmental design of all our products and services. Lexmark has
developed a multi-layered due diligence process to ensure that all
materials going into Lexmark products are safe and compliant with global
regulations regarding hazardous substances.
This product is compliant with the requirements of the European Union's
Directive 2002/95/EC on the Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment (RoHS).
This product is compliant with the requirements of the European Union’s
Registration, Evaluation, Authorization and Restriction of Chemicals
(REACH) regulation.
This product and its packaging are labeled as required by China’s
“Management Methods for Controlling Pollution by Electronic Information
Products.”
The product does not contain:
Cadmium
Hexavalent chromium
Polybrominated biphenyls
Polybrominated diphenyl ethers
Asbestos
Short chain chlorinated paraffins
Polychlorinated phenols
Polychlorinated terphenyls
Ozone depleting chemicals (Chlorofluorocarbons (CFCs), halons, HCFCs,
HBFCs, 1,1,1-trichlorethane, carbon tetrachloride, methyl bromide)
Halogenated flame retardants in cover sets
This product contains the following in limited quantities as allowed by
regulations:
Lead (use is limited to small amounts for specific applications)
Mercury (use is limited to small amount (<5 mg) in lamp)
♦
High Yield/Extra High Yield Toner Cartridges – More toner per
cartridge reduces the energy and materials used per printed page
Voluntary Environmental Certifications
This product conforms to the following
voluntary
environmental program criteria:
US EPA ENERGY STAR V 1.1
Recyclable Design
Mechanical plastic parts over 100g consist of one or more easily
separable materials.
Use of non-separable connections between different materials, such as
gluing or welding, has been avoided.
Product Description:
Measurements provided are for a non-packaged
product.
X463de, X464de, X466de, X466dwe
Weight 21.26 kg | 46.87 lb (without cartridge)
Width 488 mm | 19.21 in
Depth 438 mm | 17.24 in
Height 531 mm | 20.91 in
X466dte
Weight 24.49 kg | 53.99 lb (without cartridge)
Width 488 mm | 19.21 in
Depth 438 mm | 17.24 in
Height 620 mm | 24.41 in
Due to printer weight this printer requires at least two
people to lift it safely. For additional information consult the
setup guide.
Operational Data
Speed (Letter – ppm) Up to: 40 Speed (A4 - ppm) Up to: 38
Power (W) Printing 512.8
Ready 33.75
Power Saver 24.24
Off 0
Acoustic Noise Printing 53 dBA
(simplex)
Printing 52 dBA
(duplex)
Idle 22 dBA
To Next Page
Loading...
