PCL
2-4
Lexmark™ X642e, 644e, X646e, X850e, X852e, and X854e
The following table lists page sizes and print area dimensions for all paper and
envelope sizes the Lexmark™ X642e, X644e, X646e, X850e, X852e, and X854e
printers support. For more information about the printable areas and logical pages for
PCL emulation, see “Printable Areas” on page 2-3.
Table 2-1: Lexmark X642e, X644e, X646e, X850e, X852e, and X854e Paper and Envelope
Dimensions
Selection
Paper/Envelope
Dimensions Dimensions by Area (pels)
1
Page Size
Parameters
2
Name mm inches A B C D E F G H I
Paper
13, 613 A5 148 x 210 5.83 x 8.27 3496 4960 3196 4720 142 118 0 100 100
12, 45, 612 JIS B5 Paper 182 x 257 7.2 x 10.1 4300 6070 4000 5830 150 120 0 100 100
26, 626 A4 (198 mm)
3
210 x 297 8.3 x 11.7 4960 7014 4676 6778 142 118 0 80 80
26, 626 A4 (203 mm)
3
210 x 297 8.3 x 11.7 4960 7014 4800 6778 80 118 0 80 80
1, 601 Executive 184 x 267 7.25 x 10.5 4350 6300 4050 6060 150 120 0 100 100
2, 602 Letter 216 x 279 8.5 x 11 5100 6600 4800 6360 150 120 0 100 100
3, 603 Legal 216 x 356 8.5 x 14 5100 8400 4800 8160 150 120 0 100 100
4 or 10 Folio 216 x 330 8.5 x 13 5100 7800 4800 7560 150 120 0 100 100
15 Statement 139.7 x 215.9 5.5 x 8.5 3300 5100 3000 4860 150 120 0 100 100
101 Universal 216 x 356 8.5 x 14 150 120 0 100 100
1
Pel dimensions are for 600 dpi.
2
Page Size Parameters are explained in Table 2-16 on page 2-53.
3
The width of the logical page for A4 paper can be changed from the printer operator panel or your software application.
4
Paper ID 99 will be supported for backward compatibility with other Lexmark printers. Paper ID 99 has the same logical
paper size as ID 100 (compatible with HP LaserJet 5Si/5SiMx) but is 8 pels wider than the Lexmark 4039. B5 is not
supported in X850e, X852e, and X8454e.
Note: The explanation of the printable area assumes the Print Area menu item is set to Normal. For more information, see
“Print Area Menu Item” on page 2-6.
5
(9) not supported in X950e, X852e, and X854e.
To Next Page
Loading...
