Specifications
7-4
Clearance Requirements
The following table lists the clearance requirements.
Environmental Conditions
Note: When shipping or storing printers, always pack the printer supplies
(cartridges and photoconductors, for example) separately.
Table 7-5: Clearance Requirements
Dimensions
Printer Side X642e X644e, X646e X850e,X852e, X856e
Left 304.8 mm (12 in.) 304.8 mm (12 in.) 642 mm (25.3 in.)
Right 203.2 mm (8 in.) 203.2 mm (8 in.) 1000 mm (39.3 in.)
Front 508 mm (20 in.) 508 mm (20 in.) 480 mm (18.9 in.)
Rear 203.2 mm ( 8 in.) 203.2 mm ( 8 in.) 200 mm (7.8 in.)
Above 304.8 mm (12 in.) 304.8 mm (12 in.) 457 mm (18 in.)
Note:
When installing the printer, the customer should leave enough room to access the paper tray(s), the
multipurpose feeder, the left side door, and the rear exit door.
Table 7-6: Temperature Ranges
Printer Model Operating Value Shipping/Storage Value
X642e 16
–32°C (60–90°F) -40 to 43.3°C (-40 to 110°F)
X644e and X646e 16
–32.20°C (60–90°F) -40 to 43.3°C (-40 to 110°F)
X850e, X852e, and X854e 0
–40°C (32–104°F) -40 to 43.3°C (-40 to 110°F)
Table 7-7: Humidity Ranges
Printer Model Operating Value Shipping/Storage Value
X642e 8
–80% 5–95%
X644e, X646e 8
–80% 8–95%
X850e, X852e, and X854e 5
–80% 5–95%
To Next Page
Loading...
