1
Learning about your All-In-One
Setting up your All-In-One
If you have not already done so, follow the steps on the setup sheet that
came with your All-In-One to complete the hardware and software
installation. If problems occur during the setup process, see Setup
Troubleshooting on page 19.
Understanding the parts of your All-In-One
Scanner unit
Lift to access the print
cartridges.
Top cover
Lift to place an item on
the scanner glass.
Paper exit tray
Extend to hold paper as
it exits the All-In-One.
Paper guide
Slide next to paper to
ensure proper feeding.
Paper support
Extend to load paper
into the All-In-One.
Operator panel
Use the buttons to operate the
All-In-One (see page 2 for details
about each of the buttons).
To Next Page
Loading...
