Lexmark XC4342 - Page 152

Fax Setup
General Fax settings
Menu item Description
Fax Name Specify your fax ID.
Fax Number Specify your fax number.
Fax ID
Fax Name
Fax Number*
Set the fax ID to use during fax negotiation.
Enable Manual Fax
O*
On
Turn on the manual fax function in the printer.
Notes:
• This menu item requires a line splitter and a telephone handset.
• Use a regular telephone line to answer an incoming fax job and to dial a
fax number.
• To go directly to the manual fax function, touch # and 0 on the keypad.
Memory Use
All receive
Mostly receive
Equal*
Mostly send
All send
Set the amount of internal printer memory allocated for faxing.
Note: This menu item prevents memory
buer
conditions and failed faxes.
Cancel Faxes
Allow*
Don't Allow
Cancel outgoing or incoming faxes.
Fax Number Masking
O*
From Left
From Right
Specify the format for masking an outgoing fax number.
Digits to Mask
0–58 (0*)
Specify the number of digits to mask in an outgoing fax number.
Enable Line Connected
Detection
O
On*
Determine whether a telephone line is connected to the printer.
Note: Events are detected immediately.
Enable Line In Wrong Jack
Detection
O
On*
Determine whether a telephone line is connected to the correct port on the
printer.
Note: Events are detected immediately.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 152