Menu item Description
Auto‑Accept Push Button
Requests
O*
On
Accept requests to connect to the network automatically.
Note: Accepting clients automatically is not secured.
Note: An asterisk (*) next to a value indicates the factory default setting.
Mobile Services Management
Menu item Description
Enable IPP Print
On*
O
Allow printing from mobile devices using Internet Printing Protocol (IPP).
Enable IPP Fax
On*
O
Allow sending faxes using Internet Printing Protocol (IPP).
Enable IPP Over USB
On*
O
Allow print or scan jobs using USB connection.
Enable Scan
On*
O
Allow scanning using eSCL protocol.
Enable Mopria Discovery
On*
O
Allow the printer to be detected by Mopria‑enabled devices.
Note: An asterisk (*) next to a value indicates the factory default setting.
Ethernet
Menu item Description
Network Speed Show the speed of the active network adapter.
IPv4
Enable DHCP (On*)
Set Static IP Address
Configure the IPv4 settings.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 186
To Next Page
Loading...
