Lexmark XC4342 - Page 27

• For SMB, type the network folder address. For example, myServer/myShare/myFile.pdf. Type the
network domain name.
• If necessary, select the Authentication type for FTP and SMB.
To limit access to the bookmark, enter a PIN.
Note: The application supports the following
file
types: PDF, JPEG, and TIFF. Other
file
types such as
DOCX and XLSX are supported in some printer models.
4 Click Save.
Creating folders
1 Open a web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the web page correctly.
2 Click Bookmarks > Add Folder, and then type a folder name.
Note: To limit access to the folder, enter a PIN.
3 Click Save.
Note: You can create folders or bookmarks inside a folder. To create a bookmark, see
“Creating bookmarks”
on page 26.
Managing contacts
1 From the home screen, touch Address Book.
2 Do one or more of the following:
• To add a contact, touch on top of the screen, and then touch Create Contact. If necessary, specify a
login method to allow application access.
• To delete a contact, touch on top of the screen, touch Delete Contacts, and then select the contact.
• To edit contact information, touch the contact name.
• To create a group, touch on top of the screen, and then touch Create Group. If necessary, specify a
login method to allow application access.
• To delete a group, touch on top of the screen, touch Delete Groups, and then select the group.
• To edit a contact group, touch GROUPS > select a group name > > select the action you want to make.
3 Apply the changes.
Set up, install, and configure 27