or prescribed service conditions. The printer has a non-serviceable printhead assembly that contains a laser
with the following specifications:
Class: IIIb (3b) AlGaAs
Nominal output power (milliwatts): 20
Wavelength (nanometers): 755–800
Power consumption
Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode Description Power consumption (Watts)
Printing The product is generating hard‑copy output from
electronic inputs.
One-sided: 825 (CX825, XC8155), 870
(CX860, XC8160, XC8163); Two-sided: 775
(CX825, XC8155), 820 (CX860, XC8160,
XC8163)
Copy The product is generating hard‑copy output from
hard‑copy original documents.
650
Scan The product is scanning hard‑copy documents. 110 (CX825, XC8155); 115 (CX860, XC8160,
XC8163)
Ready The product is waiting for a print job. Higher power usage: 125; Lower power
usage: 85 (CX825, XC8155), 81 (CX860,
XC8160, XC8163)
Sleep Mode The product is in a high‑level energy‑saving mode. 1.43 (CX825, XC8155); 1.46 (CX860, XC8160,
XC8163)
Hibernate The product is in a low‑level energy‑saving mode. 0.3
O The product is plugged into an electrical outlet, but the
power switch is turned o.
0.2
The power consumption levels listed in the previous table represent time-averaged measurements.
Instantaneous power draws may be substantially higher than the average.
Values are subject to change. See
www.lexmark.com for current values.
Sleep Mode
This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by
lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged
after this product is not used for a
specified
period of time, called the Sleep Mode Timeout.
Factory default Sleep Mode Timeout for this product (in minutes): 1
Notices 299