Bluetooth
®
SWC 13
1 Your handset device’s Bluetooth
®
feature is off by default. To use your car hands-free system,
you must first turn on the Bluetooth
®
feature in your device. See your device’s user manual.
2 Press and hold the MODE button.
The hands-free system responds: Setup menu, please say a command.
3
Perform a device discovery from the handset device. See your device’s user manual.
Your handset device will search for any Bluetooth
®
devices around it. When the search is
complete, it will display a list of the devices it finds. Searching may take a minute or two to
complete.
4
Select Lexus from the list of devices.
5 If prompted by the handset device, enter the passkey 0000, and press the OK key.
6 The hands-free system responds: Pairing complete. Please say a friendly name for the device.
Say a friendly device name for your handset device. For example, you can say ‘Jenny’s Phone’.
7
The hands-free system responds: <device name> added.
Some handset devices may ask you to accept the Bluetooth
®
link. Enter YES.
8 After a few seconds the hands-free system responds: Connection complete.
4.4. Automatic connection
After initial pairing, every time you start your vehicle, your handset device and hands-free system
will automatically be connected (if your handset device is powered on and the relevant Bluetooth
®
settings are not changed).
If you start your vehicle, and your handset device is not present, the hands-free system will
automatically try to connect to other handset devices present in the device list.
When the wireless connection is established, the hands-free system responds: <device name>
connected.
EN_BT_SWC_IHF1700_OM_Lex2.indd 13 5/15/08 3:49:14 PM
To Next Page
Loading...
