16 Bluetooth
®
SWC
Note: To delete all phone number segments dictated so far, say “CLEAR ALL” when prompted
for the next segment. The hands-free system clears all segments and returns to the Number
Please? prompt.
Deleting a contact list entry
1
Press and hold the MODE button.
The hands-free system responds: Phone menu. {Say a command}.
2
When prompted, say “CONTACT LIST”.
3 If the hands-free system responds: Contact list. {Say a command}. Sa
y “DELETE <NAME>”
(where <name> is the name of a contact list entry).
4
When the hands-free system responds: Are you sure you want to delete the contact <name>?
say “Y
ES”.
The hands-free system responds: Contact deleted.
4.6. Using the phone features
These features are only available when a handset device is connected.
Answering an incoming call
Press and release the ARROW
UP button to answer an incoming call.
Note: You can also accept an incoming call in hands-free using your handset device.
When you receive an incoming call, the hands-free system responds: Call from
<numberCaller ID>, if the caller ID is available. The hands-free system plays the handset
device’s generated ring tone, if the handset device supports it. Otherwise, the hands-free
system will generate its own ring tone.
Note: When you receive an incoming call from a number in the hands-free system’s contact
list, the hands-free system will respond with: Call from <name>.
Rejecting
an incoming call
Press and release the ARROW DOWN button to reject an incoming call. The hands-free
system responds: Call rejected.
Note: You can also reject an incoming call using your handset device.
EN_BT_SWC_IHF1700_OM_Lex2.indd 16 5/15/08 3:49:15 PM