Lexus BLUETOOTH SWC - Adding Contact List Entries via Bluetooth; Using the Setup Menu

Bluetooth
®
SWC 23
Delete a contact when listing contact entries
1 List the contacts.
2 When the contact name is played for the contact you want to delete, say “DELETE CONTACT
”.
3
When the hands-free system responds: Are you sure you want to delete the contact <name>?
say “Y
ES”.
The hands-free system responds: Contact deleted, and returns to listing the contacts.
Get
the contact’s details when listing contact entries
1 List the contacts.
2 When the contact name is played for the contact you want to delete, say “DETAILS
”.
The hands-free system responds with that contact’s number.
4.9. Adding contact list entries via
Bluetooth
®
*
You can quickly transfer numbers from your handset device’s phonebook via Bluetooth
®
to
the hands-free system
Adding a Contact List Entry from your Handset Device
1 Press and hold the MODE button.
The hands-free system responds: Phone menu. {Say a command}.
2
When prompted, say “CONTACT LIST”.
3 The hands-free system responds: Contact list. {Say a command}. Say
“ADD PHONE
CONTACT
”.
4
The hands-free system disconnects your handset device and responds: Add phone contact and
is ready to receive contacts via Bluetooth
®
from your handset device.
5 Select the desired contact(s) on your handset device and send them via Bluetooth
®
to your
hands-free device. Refer to your handset device’s user’s guide for more details on how to
transfer contacts via Bluetooth
®
.
6 If prompted by the handset device, enter the passkey 0000, and press the OK key.
7 When the contact is received by the hands-free system, the system responds by reading out
the contact number as follows: <contact number #1> Yes or No?
Say “Y
ES” to accept the number.
or
Say “NO” to reject the number and go to the next number/contact if one exists.
8
If the number is accepted, the hands-free system responds: Say the name. Recite the name of
the contact to be stored e.g. Mark’s Mobile.
If an error is detected, the hands-free system asks you to try again.
If it accepts the name, the hands-free system responds: Contact <name> added.
9
If the sent contact has another number, the hands-free system responds:
<contact number #2> Y
es or No?. Simply repeat steps 7 and 8.
If more than one contact is transferred, the hands-free system responds:
N
ext contact. <contact number #3> Yes or No?. Simply repeat steps 7 and 8.
This continues until all the sent contact numbers have been processed.
* On some models.
EN_BT_SWC_IHF1700_OM_Lex2.indd 23 5/15/08 3:49:18 PM