Lexus BLUETOOTH SWC - Page 19

18 Bluetooth
®
SWC
Calling with digit segments
1 Press and hold the MODE button.
The hands-free system responds: Phone menu. {Say a command}.
2
When prompted, say “DIAL NUMBER”.
The hands-free system responds:
Number please?
3 Dictate the first segment of digits. (For example, say the first 3 numbers.)
The hands-free system recites the digits heard.
4
Dictate the next segment of digits. The hands-free system recites the digits heard.
Repeat this step until you enter the complete phone number.
5
When the complete number is recited by the hands-free system, say “DIAL” (or “Y
ES”) to dial
the number.
The hands-free system responds: Dialling.
Placing a call using phone voice commands
For some handset devices, a voice tag must already be stored in the handset device to use
this feature. For other handset devices, this command may activate the handset device’s
internal VR application.
1
Press and hold the MODE button.
The hands-free system responds: Phone menu. {Say a command}.
2
When prompted, say “PHONE VOICE COMMANDS”.
The hands-free system responds with the listening prompt.
3 Say “<
VOICE TAG>” (where <voice tag> is a voice tag stored in the handset device).
or
Say a command understood by the handset device’s VR application.
The hands-free device calls the number associated with the voice tag/VR command.
Note: Using this feature and you can dial numbers directly from your handset device’s
phonebook.
Placing a call using redial
1
Press and hold the MODE button.
The hands-free system responds: Phone menu. {Say a command}.
2
When prompted, say “REDIAL”.
The hands-free system responds: Redialing and redials the last number dialed on the handset
device.
EN_BT_SWC_IHF1700_OM_Lex2.indd 18 5/15/08 3:49:16 PM