Bluetooth
®
SWC 21
Resuming the held call
A press and release of the ARROW
UP button while a call is held will resume the call.
Accepting a waiting call
When you are in a call, an audible beep signals an incoming call.
Press and release the ARROW
UP button to place the active call on hold and answer the
waiting call.
Rejecting a waiting call
While there is a waiting call, a press and release of the ARROW
DOWN button to reject the
waiting call.
Switching between active call and held call
1 Press and hold the MODE button.
The hands-free system responds: Call menu. {Say a command}.
2
When prompted, say “SWITCH CALL”.
The hands-free system responds: Switching active calls.
Or
use the SWC: A press and release of the ARROW UP button will switch between the held
and active calls.
Ending the active call while a call is held
1 Press and hold the MODE button.
The hands-free system responds: Call menu. {Say a command}.
2
When prompted, say “HANG UP”.
The hands-free system responds: Call ended.
The held call is automatically resumed.
Or
use the SWC: A press and release of the ARROW DOWN button will end the active call,
while a call is held.
Make an outgoing call while in an active call
When in an active call, you can make an outgoing call with the “D
IAL NUMBER” and “CALL
<NAME>” VR commands which are also available in the call menu. The active call will be
placed on hold.
When dialling a new call, the active call will be put on hold. You can then use the
“C
ONFERENCE” command to join the calls into a 3-way conference.
Joining the active call and held call into a 3-way conference
1 Press and hold the MODE button.
The hands-free system responds: Call menu. {Say a command}.
2
When prompted, say “CONFERENCE”.
The hands-free system responds: Starting conference.
EN_BT_SWC_IHF1700_OM_Lex2.indd 21 5/15/08 3:49:17 PM
To Next Page
Loading...
