Bluetooth
®
SWC 29
You cannot use phone voice commands
• You may not have a “VOICE TAG” set up for the number you want to dial. Follow your device’s
user manual to set up voice dialling.
•
Most handset devices will prompt with a beep to indicate it is now time to speak. Wait until
the beep has ended before speaking. Do not over speak the beep. If your handset device is in
silence/vibrate mode the beep may not be heard.
EN_BT_SWC_IHF1700_OM_Lex2.indd 29 5/15/08 3:49:19 PM
To Next Page
Loading...
