290
5-1. Basic Operations
ES300h_OM_OM33B71U_(U)
■ Input mode
Letters and numbers are inputted via the screen.
Turn the controller to select the
desired character and press the
controller to input the character.
When this indicator is shown, you
can change input fields by moving
the controller forward.
When this indicator is shown, you
can change character types by
moving the controller to the right
and then selecting the desired
character type.
Select to erase characters one by one. Select and hold to erase all charac-
ters.
Select to complete data input.
Inputting letters and numbers
1
2
3
4
5
To Next Page
Loading...
