Lexus LC 500h - Cornering Light Control; Cornering Lights; Follow Me Home System; Turning on the High Beam Headlights

191
4
4-3. Operating the lights and wipers
Driving
changed.
(Customizable features: P.436)
1 With the headlights on, push the
lever away from you to turn on the
high beams.
Pull the lever toward you to the center
position to turn the high beams off.
2 Pull the lever toward you and
release it to flash the high beams
once.
You can flash the high beams with the
headlights on or off.
This system allows the headlights and
front position lights to be turned on for
30 seconds when the engine switch
<power switch> is off.
Pull the lever toward you and release it
with the light switch is in after turn-
ing the engine switch <power switch>
off.
Pull the lever toward you and release it
again to turn off the lights.
When any of the following conditions is
met, while the headlights (low beam)
are on, the cornering lights will addi-
tionally turn on and light up the direc-
tion of movement for the vehicle. This is
to ensure excellent visibility when
either driving at intersections or park-
ing at night.
 The steering wheel is operated
 The turn signal lever is operated
 The shift position is in R (both left
and right side cornering lights)
■ Cornering light control
● The lights illuminate when the vehicle
speed is approximately 30 km/h (19
mph) or less. However, the lights turn off
when the vehicle speed increases to
approximately 35 km/h (22 mph) or
more.
● After the lights remain illuminated for 30
minutes, they automatically turn off.
NOTICE
■ To prevent 12-volt battery discharge
Do not leave the lights on longer than
necessary when the engine is not running
<hybrid system is not operating>.
Turning on the high beam head-
lights
Follow me home system (if
equipped)
Cornering lights