249
4
4-5. Using the driving support systems
Driving
Cancel switch
1 Press the cruise control main switch
to activate the cruise control.
Cruise control indicator will come on.
Press the switch again to deactivate the
cruise control.
2 Accelerate or decelerate the vehi-
cle to the desired speed, and press
the “-SET” switch to set the speed.
Cruise control “SET” indicator will come
on.
The vehicle speed at the moment the
switch is released becomes the set speed.
To change the set speed, operate the
“+RES” or “-SET” switch until the
desired set speed is obtained.
1 Increases the speed
2 Decreases the speed
Fine adjustment: Press the switch.
Large adjustment: Press and hold switch.
The set speed will be increased or
decreased as follows:
Fine adjustment: By approximately 1 km/h
(0.6 mph) each time the switch is pressed.
Large adjustment: The set speed can be
increased or decreased continually until
the switch is released.
1 Pressing the cancel switch cancels
the constant speed control.
The speed setting is also canceled when
the brakes are applied.
2 Pressing the “+RES” switch
resumes the constant speed con-
trol.
Setting the vehicle speed
Adjusting the set speed
D
Canceling and resuming the
constant speed control
To Next Page
Loading...
