2-1. Driving procedures
When the vehicle is stopped by depressing the brake pedal, the brake
hold system keeps the brakes applied. The system releases the brakes
when the accelerator pedal is depressed to allow smooth start off.
Press the brake hold switch.
The brake hold standby indi-
cator ( ) comes on
when the system is turned on.
Without paddle shift switches
Depress the brake pedal and stop the vehicle while the
shift lever is in “D”, “S” or “N”.
The brakes will be held. The brake hold operated indicator (
) comes on while the brakes are being held.
Depress the accelerator pedal while the shift lever is in
“D” or “S” to accelerate the vehicle.
The brakes will be released.
With paddle shift switches
Depress the brake pedal and stop the vehicle while the
shift lever is in “D”, “M” or “N”.
The brakes will be held. The brake hold operated indicator (
) comes on while the brakes are being held.
Depress the accelerator pedal while the shift lever is in
“D” or “M” to accelerate the vehicle.
The brakes will be released.
To Next Page
Loading...
