3-8. Other interior features
The clock is displayed when the “ENGINE START STOP” switch is
in ACCESSORY or IGNITION ON mode. Perform the following
steps to adjust the clock.
Owners of models equipped with a navigation system should
refer to the “Navigation System Owner’s Manual”.
Press “SETUP”.
Touch “Clock” on the “Setup” screen.
Turns daylight saving time
on/off
Adjusts the hour
Adjusts the minutes
Rounds to the nearest
hour*
After setting, touch “OK”.
*: e.g.1:00 to 1:29 1:00
To Next Page
Loading...
