2-3. Operating the lights and windshield wipers
High beam automatic turning on or off conditions
When all of the following conditions are fulfilled, high beam
will be automatically turned on (after approximately 1 sec-
ond):
Vehicle speed is above approximately 40 km/h (25 mph).
The area ahead of the vehicle is dark.
There are no oncoming or preceding vehicles with head-
lights or tail lights turned on.
If any of the following conditions are fulfilled, high beam will
be automatically turned off:
Vehicle speed drops below approximately 30 km/h (19
mph).
The area ahead of the vehicle is not dark.
Oncoming or preceding vehicles have headlights or tail
lights turned on.
Turning the high beam on/off manually
Switching to low beam
Pull the lever to original
position.