2-4. Using other driving systems
Accelerate or decelerate the
vehicle to the desired speed,
and push the lever down to
set the speed.
The vehicle speed at the
moment the lever is released
becomes the set speed.
If this is performed when
vehicle speed is less than
about 50 km/h (30 mph) and
the vehicle ahead can be
detected, your vehicle will
start following the vehicle
ahead of you at a set speed of
about 50 km/h (30 mph)
(vehicle-to-vehicle distance
control mode only).
Adjusting the set speed
To change the set speed, operate the lever until the desired set
speed is displayed.
Increases the speed
(Except when the vehicle has
been stopped by system con-
trol in vehicle-to-vehicle dis-
tance control mode)
Decreases the speed
Fine adjustment: Momentar-
ily move the lever in the
desired direction.
Large adjustment: Hold the
lithdidditi
To Next Page
Loading...
