333
2-4. Using other driving systems
2
When driving
LS460_EE
Disabling the system
Even if the shift lever is in “R” position, if you push any of the switches
around the screen, such as “SETUP” or “INFOTEL”, the screen will switch
to that mode.
When in the parking assist mode or parallel parking assist mode, in the fol-
lowing case the voice guidance will say “The assist has been cancelled.”, a
message will be displayed, and the system will be disabled. (P. 323)
After the following operations:
• Moving the steering wheel
• Using the accelerator
• Moving the shift lever out of “R” position
• Applying the parking brake
• Switching the screen display
In the following situations:
• If the vehicle slips forward or stops after taking your foot off the brake
pedal
• If the backing speed is too fast
• If normal assistance cannot be rendered due to worn tires or low tire
inflation pressure
• If the target parking position has not been confirmed on the target park-
ing position setting screen before backing up
• Any warnings displayed on the screen are not acknowledged before
backing up
• If there is a system malfunction
• If the system temperature protection function operates
• If a hands-free phone call is received
If the system is disabled while backing up, grip the steering wheel firmly
and depress the brake pedal to bring the vehicle to a halt. The system has
been completely disabled, so you may either start again from the beginning,
or if you wish to finish parking manually, be sure to operate the steering
wheel as you would normally.
To Next Page
Loading...
