2-4. Using other driving systems
In the following cases, it may become
difficult to see the images on the
screen, even when the system is func-
tioning correctly:
The vehicle is in a dark area, such
as at night.
The temperature near the lens is
extremely high or low.
Water droplets are on the camera
lens or humidity is high, such as
when it rains.
Foreign matter, such as snow or
mud, adheres to the camera lens.
The camera has scratches or dirt on
it.
The sun or headlights are shining
directly into the camera lens.
If a bright light, such as sunlight
reflected off the vehicle body, is picked
up by the camera, a smear effect* char-
acteristic to the camera may occur.
*:Smear effect A phenomenon that
occurs when a bright light is picked
up by the camera; when transmitted
by the camera, the light source
appears to have a vertical streak
above and below it.
If you install the antenna of a wireless
device close to the camera, the screen
image may be affected by the electro-
magnetic waves, and the system may not
function correctly. Install an antenna
away from the camera.
The method for adjusting the picture
To Next Page
Loading...
