368
2-4. Using other driving systems
LS460_EE
Camera sensor (with driver monitor system)
Observe the following to ensure that the PCS functions correctly:
Do not subject the camera sensor to strong impact or force, and do not dis-
assemble the camera sensor.
Do not scratch the camera lens, or let it get dirty.
Headlights (with driver monitor system)
Observe the following to ensure proper near-infrared ray projection:
Keep the headlights clean at all times.
The detection performance may deteriorate if the high beams are mis-
aligned or the high beam is inoperative.
Precautions for cleaning the driver monitor sensor (with driver monitor sys-
tem)
Gently wipe the sensor with a soft cloth to prevent damage.
Wipe any excess dirt with a cloth dampened with neutral detergent, all liq-
uids having been wringed out of the cloth. After that, wipe again with a
dry cloth.
Do not use benzene, thinner, glass cleaners, wax, etc.
To Next Page
Loading...
