704
5-2. Steps to take in an emergency
LS460_EE
Install the spare tire and loosely
tighten each wheel nut by hand
by approximately the same
amount.
Turn the lug nuts until the wash-
ers come into contact with the
wheel.
Lower the vehicle.
Firmly tighten each nut two or
three times in the order shown
in the illustration.
Tightening torque:
140 N•m (14.3 kgf•m, 103
ft•lbf)
Stow the flat tire, tire jack and all tools.
Wheel nut
Washer
Disc wheel
After completing the tire change
The tire pressure warning system must be reset. (P. 645)
To Next Page
