92
1-3. Adjustable components (seats, mirrors, steering wheel)
LS460_EE
When driving position memory is linked with door unlock operation
If the driver’s door is opened, the driver’s seat will move toward the memo-
rized position but stop slightly beforehand to allow easy access to the vehi-
cle.
Turning the “ENGINE START STOP” switch to ACCESSORY or IGNI-
TION ON mode, or fastening the driver's seat belt moves the seat fully into
the memorized position.
Canceling the linked door unlock operation
Turn the “ENGINE START STOP” switch OFF and close the
driver's door.
Using the wireless remote control: While pressing the “SET” but-
ton, press on the wireless remote control until the signal
beeps.
Using the door lock switch: While pressing the “SET” button, press
the lock or unlock side on the door lock switch until the signal
beeps.
Operating the driving position memory after turning the “ENGINE START
STOP” switch OFF
In the following situations, the memorized positions (1 - 3) can be activated
even after the “ENGINE START STOP” switch has been turned off.
Driver's seat (except steering wheel):Within 180 seconds after the driver's
door is opened and within 60 seconds
after the driver's door is closed.
Front passenger's seat:Within 180 seconds after the front passenger's door is
opened.
Stopping memorized position recall operations part-way through
Press the “SET”, “1”, “2” or “3” button to stop all memorized recall opera-
tions part way through.
To individually stop a memorized position recall operation for a seat, the
steering wheel, outside rear view mirrors, or a seat belt shoulder anchor,
operate the corresponding position adjustment switch while the memorized
position is being recalled. All items can still be adjusted manually even if
their recall operation is stopped part-way through.
To Next Page
Loading...
