108
2. Instrument cluster
LX570_450d_OM_OM60R63E_(GE)
■ Drive information
4 of the following items can be registered and displayed as the drive informa-
tion 1 and the drive information 2 (2 items on each screen).
Refer to P. 111 for the registration method of the drive information 1 and the
drive information 2.
● Current fuel consumption (bar type/value type)
Displays the current rate of fuel consumption.
● Average fuel consumption (after reset*
2
/after start/after refuel)*
1
Displays the average fuel consumption since the function was reset, the
engine was started, and the vehicle was refueled, respectively.
● Average vehicle speed (after reset*
2
/after start)
Displays the average vehicle speed since the function was reset and the
engine was started, respectively.
● Elapsed time (after reset*
2
/after start)
Displays the elapsed time since the function was reset and the engine was
started, respectively.
● Distance (driving range/after start)
Displays the estimated maximum distance that can be driven with the
quantity of fuel remaining.
• This distance is computed based on your average fuel consumption.
As a result, the actual distance that can be driven may differ from that
displayed.
• When only a small amount of fuel is added to the tank, the display may
not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled with-
out turning the engine switch off, the display may not be updated.
*
1
: Use the displayed average fuel consumption as a reference.
*
2
: The function can be reset by pressing for longer than 1 second when the item to
reset is displayed. If there is more than one item that can be reset, the item selection
screen will appear.
Drive information
To Next Page
Loading...
