220
4-2. Driving procedures
LX570_450d_OM_OM60R63E_(GE)
Automatic transmission
While the engine switch is in IGNITION ON mode, move the shift lever
with the brake pedal depressed.
When shifting the shift lever between P and D, make sure that the vehicle is
completely stopped.
*
1
: Shifting to the D position allows the system to select a gear suitable for the driving
conditions. Setting the shift lever to the D position is recommended for normal driv-
ing.
*
2
: If equipped, by selecting shift ranges using paddle shift switches, you can control
engine braking forces.
*
3
: Selecting shift ranges using S mode restricts the upper limit of the possible gear
ranges, controls engine braking forces, and prevents unnecessary upshifting.
Shifting the shift lever
Shift position purpose
Shift position Purpose and condition
P Parking the vehicle/starting the engine
R Reversing
N
Neutral
(Condition in which the power is not transmitted)
D Normal driving*
1
or temporary shift range selection driving*
2
S S mode driving*
3
(P. 223)
To Next Page
Loading...
