118
2. Instrument cluster
LX570_450d_OM_OM60R63E_(GE)
■ Head-up display
The head-up display may seem dark or hard to see when viewed through sunglasses,
especially polarized sunglasses.
Adjust the brightness of the head-up display or remove your sunglasses.
■ When the battery is disconnected
The customize settings of the head-up display will be reset.
■ Display brightness
● The brightness of the head-up display can be adjusted on of the multi-information
display. Also, it is automatically adjusted according to the ambient brightness.
● When the vehicle is stopped, the display may dim temporarily. This is not a malfunction.
■ Enabling/disabling of the head-up display
If the head-up display is disabled, it will remain disabled when the engine switch is turned
off then back to IGNITION ON mode.
■ Head-up display automatic position adjustment
If the display position is recorded into memory, the head-up display will be automatically
adjusted to the desired position. (P. 170)
■ Before using the head-up display
● Check that the position and brightness of the head-up display image does not inter-
fere with safe driving. Incorrect adjustment of the image’s position or brightness may
obstruct the driver’s view and lead to an accident, resulting in death or serious injury.
● Do not continuously look at the head-up display while driving as you may fail to see
pedestrians, objects on the road, etc. ahead of the vehicle.
■ Caution for changing settings of the head-up display
As the engine needs to be running while changing the settings of the head-up display,
ensure that the vehicle is parked in a place with adequate ventilation. In a closed area
such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect
and enter the vehicle. This may lead to death or a serious health hazard.
To Next Page
Loading...
