211
4-1. Before driving
4
Driving
LX570_450d_OM_OM60R63E_(GE)
■ Sudden acceleration/steering input/cornering
Executing sharp turns when towing may result in the trailer colliding with your
vehicle. Decelerate well in advance when approaching turns and take them
slowly and carefully to avoid sudden braking.
■ Important points regarding turning
The wheels of the trailer will travel closer to the inside of the curve than the
wheels of the vehicle. To make allowance for this, take the turns wider than you
would normally do.
■ Important points regarding stability
Vehicle movement resulting from uneven road surfaces and strong cross-
winds will affect handling. The vehicle may also be rocked by passing buses or
large trucks. Frequently check behind when moving alongside such vehicles.
As soon as such vehicle movement occurs, immediately start to decelerate
smoothly by slowly applying the brakes. Always steer the vehicle straight
ahead while braking.
■ Passing other vehicles
Consider the total combined length of your vehicle and trailer and ensure that
the vehicle-to-vehicle distance is sufficient before executing lane changes.
■ Transmission information
To maintain engine braking efficiency and charging system performance
when using engine braking, do not put the transmission in D. (P. 220)
● 8-speed models: If in the S mode, the transmission shift range position must
be in 6 or lower.
● 6-speed models: If in the S mode, the transmission shift range position must
be in 4 or lower.
■ If the engine overheats
Towing a loaded trailer up a long, steep incline in temperatures exceeding
30C (85F) may result in the engine overheating. If the engine coolant tem-
perature gauge indicates that the engine is overheating, turn the air condition-
ing off immediately, leave the road and stop the vehicle in a safe place.
(P. 611)
■ When parking the vehicle
Always place wheel chocks under the wheels of both the vehicle and trailer.
Set the parking brake and shift the shift lever to P.
To Next Page
Loading...
