272
4-5. Using the driving support systems
LX570_450d_OM_OM60R63E_(GE)
Region B
(The pedestrian detection function is not available)
The pre-crash safety system is enabled and the system determines that the possibility of a
frontal collision with a vehicle is high.
Each function is operational at the following speeds:
● Pre-crash warning:
• Vehicle speed is between approximately 15 and 180 km/h (10 and 110 mph).
• The relative speed between your vehicle and the vehicle ahead is approximately 10
km/h (7 mph) or more.
● Pre-crash brake assist:
• Vehicle speed is between approximately 30 and 180 km/h (20 and 110 mph).
• The relative speed between your vehicle and the vehicle ahead is approximately 30
km/h (20 mph) or more.
● Pre-crash braking:
• Vehicle speed is between approximately 15 and 180 km/h (10 and 110 mph).
• The relative speed between your vehicle and the vehicle ahead is approximately 10
km/h (7 mph) or more.
The system may not operate in the following situations:
● If a battery terminal has been disconnected and reconnected and then the vehicle has
not been driven for a certain amount of time
● If the shift lever is in R
● If VSC is disabled (only the pre-crash warning function will be operational)
● If the low speed four-wheel drive indicator is illuminated (only the pre-crash warning
function will be operational)
■ Pedestrian detection function*
2
*
2
: For countries/areas specified as Region B (P. 266), the pedestrian detection func-
tion may not be available.
The pre-crash safety system detects pedestrians
based on the size, profile, and motion of a
detected object. However, a pedestrian may not
be detected depending on the surrounding
brightness and the motion, posture, and angle of
the detected object, preventing the system from
operating properly. (P. 277)