594
7-2. Steps to take in an emergency
LX570_450d_OM_OM60R63E_(GE)
Assembling the jack handle.
Remove the jack handle and the jack extension bar from the tool box and assemble by
following these steps.
Loosen the screw using a screw-
driver.
Assemble the jack handle and the
jack handle extension bar and
tighten the screw.
Check that the screw is firmly tight-
ened.
Open the cover.
Insert the jack handle extension into
the lowering screw.
Lower
Raise
Place a rag under the jack handle
extension to protect the back door.
Taking out the spare tire
2
To Next Page
Loading...
