601
7-2. Steps to take in an emergency
7
When trouble arises
LX570_450d_OM_OM60R63E_(GE)
Lay down the tire with the valve stem
facing up and install the spare wheel
cover.
Install the holding bracket, inserting
the claw into the wheel lug nut hole.
Turn the jack handle extension
clockwise to take up slack in the
chain.
Then, check to ensure the claw is in the
wheel lug nut hole and the holding
bracket is centered in the wheel hub.
Holding bracket
Claw
■ Stowing the flat tire
Failure to follow steps listed under stowing the tire may result in damage to the spare
tire carrier and loss of the tire, which could result in death or serious injury.
Stowing the flat tire, jack and all tools
1
To Next Page
Loading...
