SWITCHES
28
REAR WINDOW WIPER AND
WASHER SWITCH
12X009b
1
Washer on during wiping
2
Washer on
To turn the wipers on, twist the knob at the end of the lever.
The ignition key must be in the ”ON” position.
There are 2 settings:
”INT” position: Intermittent operation
”ON” position: Low speed operation
To make the washer squirt, twist the knob downward to
position 2.
To make the washer squirt while operating in ”ON”
position, twist the knob upward to position 1.
The knob automatically returns from these positions after you
release it.
The low washer fluid warning light in the instrument cluster
comes on when the fluid level in the tank becomes nearly
empty. For information on adding washer fluid, see ”Adding
washer fluid” on page 331.
NOTICE
Do not operate the rear window wiper if the rear window
is dry. It may scratch the glass.
To Next Page
Loading...
