50
2. Bluetooth
®
SETTINGS
LX570_Navi_OM60P47U_(U)
16.05.31 17:44
3 Select the desired connection.
4 Check that a confirmation screen is dis-
played when the connection is com-
plete.
If an error message is displayed, follow the
guidance on the screen to try again.
■ AUTO CONNECTION MODE
When the engine switch is in ACCES-
SORY or IGNITION ON mode, the sys-
tem searches for a nearby registered
device.
The system will connect with the registered
device that was last connected, if it is
nearby. When automatic connection prior-
ity is set to on and there is more than one
registered Bluetooth
®
phone available, the
system will automatically connect to the
Bluetooth
®
phone with the highest priority.
(→P.54)
■ CONNECTING MANUALLY
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*”.
4 Follow the steps in “CONNECTING A
Bluetooth
®
DEVICE” from “STEP 2”.
(→P.49)
*: The Bluetooth
®
word mark and logos are
registered trademarks owned by
Bluetooth SIG, Inc.
INFORMATION
●It may take time if the device connection
is carried out during Bluetooth
®
audio
playback.
●Depending on the type of Bluetooth
®
device being connected, it may be neces-
sary to perform additional steps on the
device.
●When disconnecting a Bluetooth
®
device, it is recommended to disconnect
using the system.
To turn auto connection mode on, set
“Bluetooth* Power” to on. (→P.54)
Leave the Bluetooth
®
device in a loca-
tion where the connection can be estab-
lished.
When the auto connection has failed or
“Bluetooth* Power” is turned off, it is
necessary to connect Bluetooth
®
man-
ually.
To Next Page
Loading...
