LEYBOLD VARODRY VD100 - Pump Timing Belt Change

7.2 Tools required for maintenance
Figure 9. Tools required for maintenance
Sr No. Description Quantity
1 Torque wrench 1
2 Allen key socket No.6 1
3 Socket wrench insert 22 1
4 Wrench 12 1
5 Allen key T handle 5 1
6 M8 hex screw 1
7 Mallet 1
8 Pulling device 1
9 Ratchet 1
Special tool kit for belt replacement (EK6530942)
10 Tool for belt tension measurement 1
11 Equipment fail safe gear adjustment 1
12 Tool for belt tension adjustment 1
7.3 Pump timing belt change
The pump timing belt is subjected to wear and must be replaced after a
dened
operation period (see Maintenance schedule on page 21). The belt
exchange can be either performed by us or by the pump user.
300766038_002_C3 - 09/2021 - © Leybold
22
Maintenance