50
15. Insert an Upper Punch through the top of the Turret.
16. Place the Upper Punch's head on the new Upper Tracking.
16.1 Note: Be sure that the Upper Punch's head is above the new Upper Tracking to
prevent damage.
17. Rotate the Handle until the next Upper Punch can be inserted.
18. Repeat steps 15-17 until all the Upper Punches are inserted into the Turret.
19. Resecure the Upper Tracking Key with an Allen key.
19.1 Note: Manually turn the RTP 9® Turret for a couple of rotations to ensure that the
Upper Punches are situated correctly.
To Next Page
Loading...