LFA RTP 9 - Description of RTP 9 Parts

82
Upper Tracking Key
The Upper Tracking Key keeps the Tooling on
the Upper Tracking. In order to change the
Upper Punches, this part must be removed.
Order at https://www.lfatabletpresses.com/rtp-9-
upper-tracking-key
Tooling
The Tooling consists of the Dies, the Upper
Punches, and the Lower Punches. They all work
as a set and compress the powder into tablets.
Order at https://www.lfatabletpresses.com/
products/tablet-press-tooling
Fill Tray Height Adjusters
The Fill Tray Height Adjusters move the Fill
Tray's position in proximity to the Turret, which
affects powder flow. Order at https://www.
lfatabletpresses.com/rtp-9-feeder-tray-height-
adjusters
Lower Punch Insertion Disc
The Lower Insertion Disc can be removed to
take out/insert the Lower Punches from/into the
Turret. Order at https://www.lfatabletpresses.
com/rtp-9-lower-punch-insertion-disc
Description of RTP 9® Parts