LFA RTP 9 - Page 59

To Next Page

To Previous Page

24. Remove the Handle from the Drive Belt Pulley.

25. Place the Fill Tray back on the Turret.

25.1 Note: Please refer to the Fill Tray Height adjustment instructions on page 22 for

calibration.

26. Tighten the Fill Tray Thumb Bolts back onto the Fill Tray and RTP 9® by hand and/or with an

Allen key.

29. Resecure the bolts on the Perspex Casing with an Allen key.

30. Resecure the Hopper to the Perspex Casing with an Allen key.